The WEILDER 5-hole wheel spacers can significantly improve the road holding of your competition vehicle. They center the wheel while widening the track.
WEILDER wheel spacers are made of high quality anodized aluminum and specially adapted to each vehicle.
WEILDER 5-hole wheel spacers are available in different thicknesses: 10, 15 or 20mm.
For the assembly of these spacers, we advise you to use special studs which will be longer than the original screws.
Spacers are sold in pairs.
For competition use, we recommend a stud + nut combination.
Attention, for safety reasons, it is essential to respect the pitches and lengths of the threads.
Fitting track spacers requires the use of longer studs: length of your original bolting + width of the spacer.
Fasteners / bolts not supplied.
Advice before placing your order:
you need to measure your center distance. The center distance is measured as follows: it is the distance between the center of one of the holes in your rim and the center of your wheel, then multiply this result by 1.701.
Assembly advice:
You need to check the centering length of your hub in order to choose the right spacer thickness. Some vehicles having long centerings, the thinnest spacers cannot be mounted.
If the length of your centering is less than or equal to 11mm, you can mount 12mm thick spacers, if it is less than or equal to 15mm, 16mm spacers and less than or equal to 19mm, 20mm spacers.
Suitable for the following vehicles:
- RENAULT Clio 4 RS from 06/2013.
- RENAULT Megane 3 from 09/2008.
- ALPINE A110 252 from 2017
Products intended for the adaptation of vehicles, with a view to competition, may make their circulation prohibited on roads open to public traffic, insofar as they significantly modify the characteristics of the vehicles as described in the acceptance report. issued by the mining department: noise, pollution, maximum speed, tire size, etc.
