WEILDER 5-hole track wideners significantly improve the handling of your competition vehicle. They allow the wheel to be centered while widening the track.
WEILDER track wideners are made of high quality anodized aluminum and specially adapted to each vehicle.
WEILDER 5-hole track wideners are available in different thicknesses: 10, 15 or 20mm.
For the assembly of these track wideners, we advise you to use special studs which will be longer than the original screws.
The wideners are sold in pairs.
For use in competition, we recommend a combination of studs + nuts.
Attention, for safety reasons, it is essential to respect the steps and lengths of the threads.
The installation of track wideners requires the use of longer studs: length of your original bolts + width of the widener.
Screws / bolts not supplied .
Advice before placing your order:
you need to measure your center distance. The center distance is measured as follows: it is the distance between the center of one of the holes in your rim and the center of your wheel then multiply this result by 1.701.
Mounting advice:
You need to check the centering length of your hub in order to choose the right thickness of spacers. Certain vehicles having long centerings, the thinnest spacers will not be able to be fitted.
If the length of your centering is less than or equal to 11mm, you can mount spacers of 12mm thickness, if it is less than or equal to 15mm, spacers of 16mm and less than or equal to 19mm, spacers of 20mm.
Suitable for the following vehicles:
IMPREZA I 2.0 16V GT TURBO (211CV ) (12/1994 > 12/2000)
IMPREZA II 2.0 WRX (218CV) (01/2001 > 12/2002)
IMPREZA II 2.0 WRX (225CV) (12/2002 > 01/2006)
IMPREZA II 2.0 WRX STI (265CV) (11/2001 > 12/2002)
IMPREZA II WRX STi 2.5 16V TURBO 4WD (320CV) (09/2005 > )
IMPREZA III 2.5 WRX STI (300CV) ( 01/2008 > 12/2011)
Products intended for the adaptation of vehicles, with a view to competition, may make their circulation prohibited on roads open to public traffic, to the extent that they significantly modify the characteristics of the vehicles as described in the acceptance report issued by the mining service: noise, pollution, maximum speed, tire size, etc.
