The WEILDER 4-hole wideners significantly improve the handling of your competition vehicle. They allow to center the wheel while widening the way.
WEILDER track wideners are made of high-quality anodized aluminum and are specially adapted to each vehicle.
WEILDER 4-hole channel wideners are available in different thicknesses: 10, 15 or 20mm.
For the installation of these track wideners, we advise you to use special studs that will be longer than the original hardware.
Enlargers are sold in pairs.
p>
For use in competition, we recommend a combination studs + nuts.
Attention, for safety reasons, it is essential to respect the steps and lengths of the threads.
Mounting track wideners requires the use of longer studs: length of your original bolt + width of the widener.
Bolts/bolts not supplied.
Advice before placing your order:you need to measure your center distance. The distance between the center of one of the holes in your rim and the center of your wheel is measured as follows: multiply this result by 2.
Assembly Tip:
You need to check the centering length of your hub in order to choose the right thickness of spacers. Some vehicles with long centering, the finest spacers will not be able to be mounted.
If the length of your centering is less than or equal to 11mm, you can mount enlargers of 12mm thickness, if it is less than or equal to 15mm, enlargers of 16mm and less than or equal to 19mm, enlargers of 20mm.
Suitable for the following vehicles:
any Renault vehicle with a 4x100 center distance and a 60.1mm boron
Products intended for the adaptation of vehicles, with a view to competition, may make their circulation prohibited on roads open to public traffic, in so far as they substantially alter the characteristics of the vehicles as described in the acceptance report issued by the mining service: noise, pollution, maximum speed, tire size, etc.