TEGIWA Driveshaft Spacers. These are CNC machined here in the UK and then clear anodized for a long lasting finish. When you lower an S2000 the driveshafts will be at a more severe angle and will stretch about 10mm or more per side. This will put a lot more pressure on the driveshafts and cv boots and will cause them to wear out quickly. These spacers are used to relieve the extra pressure on the driveshafts and will help restore the driveshaft angle to what it was before. The kit comes complete with new bolts and nuts. OEM torque spec not suitable - we advise a torque setting of 60nm.