Mishimoto High Strength Braided Line

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 500
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -4AN
TechSpec Outlet: -4AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -4AN line end fittings----Minimum Bend Radius: 2"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Stainless Steel -

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 501
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -6AN
TechSpec Outlet: -6AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -6AN line end fittings----Minimum Bend Radius: 2.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -6AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 502
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -8AN
TechSpec Outlet: -8AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -8AN line end fittings----Minimum Bend Radius: 3.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -8AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 503
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -10AN line end fittings----Minimum Bend Radius: 4"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -4AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 10ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 15ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 3ft - Stainless Steel

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Black Nylon

TechSpec Inner Material: CPE
TechSpec Compatible Fluids: Petroleum-Based Fuels--Engine Oil--Engine Coolant
TechSpec Max Fluid Pressure (PSI): Stainless Steel 1000, Nylon: 504
TechSpec MaxFluidTemperature (F): 300
TechSpec Inlet: -12AN
TechSpec Outlet: -12AN
TechSpec Fitting Angle: Straight
Note: Requires assembly with -12AN line end fittings----Minimum Bend Radius: 4.5"
TechSpec PurchaseIncludes: Mishimoto Braided -AN Line--Mishimoto Lifetime Warranty
Features:
High-strength braided design for use in locations where abrasion resistance is vital
304 stainless-steel version resists corrosion
Available nylon outer braid will not abrade soft materials such as plastic or aluminum
Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
Fits with -12AN fittings (sold separately)
Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
Provides refined engine bay aesthetics and improved durability over rubber lines
Operating temperature range from -40F to 300F
Maximum pressure rating of up to 1,000 PSI
Mishimoto Lifetime Warranty
Install Difficulty: 2
OptionLabel: 6ft - Stainless Steel